MY Amateur Radio ( 9w2yed )

Selamat Berpuasa ; Semoga Bulan Ramadhan ini Memberi 1000 Rahmat Kepada Kita Semua.

2010-08-11T09:37:00.005+08:00

'O you who believe!

Fasting is prescribed for you as it was prescribed for those before you, that you may acquire Taqwa'

.183.

Al -Balqarah

When I do count the clock that tells the time

2010-07-13T15:32:00.002+08:00

When I do count the clock that tells the time,

And see the brave day sunk in hideous night;

When I behold the violet past prime,

And sable curls all silvered o'er with white;

When lofty trees I see barren of leaves

Which erst from heat did canopy the herd,

And summer's green all girded up in sheaves

Borne on the bier with white and bristly beard,

Then of thy beauty do I question make

That thou among the wastes of time must go,

Since sweets and beauties do themselves forsake

And die as fast as they see others grow;

And nothing 'gainst Time's scythe can make defence

Save breed, to brave him when he takes thee hence.

~William Shakespeare~

My Family

2010-07-13T15:21:00.005+08:00

Portia:

"Think you I am no stronger than my sex,Being so father'd and so husbanded?"

Julius Caesar (II, i, 296-297)

2010-06-01T09:44:00.004+08:00

Very special thanks to my dearest wife for the meaning full gift on my 2010 special day. It’s been my passioned for a long time in photography… this is the fresh start for me... Thank you dear….

to my ham's radio companions.......

2010-05-31T11:27:00.005+08:00

It's been too long since my last post. Too busy..... Too lazy.... the diseases seem spreading too much in this body.... sorry guys it's been long time no see...... so at this time here something to share and to view several pictures taken while i'm away for quite a time.... 73's and keep in touch..

AO-51 here I go....! ! !

2008-09-03T18:38:00.003+08:00

Five feets More.....! !

2008-08-01T15:27:00.006+08:00

The Three Stooges

2008-07-30T08:35:00.010+08:00

MY VHF-UHF Portable Yagi-Uda Antenna Construction For Satellite Communication Homebrew design from XE1MEX

2008-07-17T16:40:00.019+08:00

2008-04-23T13:24:00.010+08:00

Introduction to HF Propagation

In a region extending from a height of about 50 km to over 500 km, some of the molecules of the atmosphere are ionised by radiation from the Sun to produce an ionised gas. This region is called the ionosphere.
Ionisation is the process in which electrons, which are negatively charged, are removed from (or attached to) neutral atoms or molecules to form positively (or negatively) charged ions and free electrons. It is the ions that give their name to the ionosphere, but it is the much lighter and more freely moving electrons which are important in terms of high frequency (HF: 3 to 30 MHz) radio propagation. Generally, the greater the number of electrons, the higher the frequencies that can be used. During the day there may be four regions present called the D, E, F1 and F2 regions. Their approximate height ranges are:

D region 50 to 90 km;
E region 90 to 140 km;
F1 region 140 to 210 km;
F2 region over 210 km.

During the daytime, sporadic E (section 1.6) is sometimes observed in the E region, and at certain times during the solar cycle the F1 region may not be distinct from the F2 region but merge to form an F region. At night the D, E and F1 regions become very much depleted of free electrons, leaving only the F2 region available for communications; however it is not uncommon for sporadic E to occur at night.
Only the E, F1, sporadic E when present, and F2 regions refract HF waves. The D region is important though, because while it does not refract HF radio waves, it does absorb or attenuate them

The F2 region is the most important region for high frequency radio propagation as, it is present 24 hours of the day. Its high altitude allows the longest communication paths, it usually refracts the highest frequencies in the HF range.
The lifetime of electrons is greatest in the F2 region which is one reason why it is present at night. Typical lifetimes of electrons in the E, F1 and F2 regions are 20 seconds, 1 minute and 20 minutes, respectively.

Latest full-field Solar Images These images are current views of the sun shown at different wavelengths of light as taken by SOHO and the Yohkoh soft-Xray telescope.

Fe IX/X 171 Å

Fe XII 195 Å

Generally, more bright regions on the disk indicates more solar activity, which usually leads to higher solar flux levels (which usually leads to better propagation!).

He II/Si XI 304 Å

Fe XV 284 Å

Aurora is caused by interaction between the Earth's magnetic field and the solar wind (a mix of charged particles blowing away from the sun). During solar storms, enough of these charged particles make it through to the Earth's upper atmosphere that they interact with the earths natural magnetic field lines. When enough of these particles collide, energy is released in the form of auroral light. In addition to creating a pretty light show (mostly in upper latitudes), radio signals scatter off of these particles and can greatly enhance propagation on 6 meters and above. High levels of aurora can also make propagation via polar routes difficult.

Solar X-ray Flux

This plot shows 3-days of 5-minute solar x-ray flux values measured on the SWPC primary and secondary GOES satellites. One low value may appear prior to eclipse periods. Click on the plot to open an updating secondary window

D-Region Absorption Prediction Map

This images dynamically updates once a minute. specialy designed by NOAA National Weather and Space Service Prediction Center. for HF Radio communications prediction. Click on any thumbnail to view a larger image.

Real-Time Northern Hemisphere Auroral Activity

Real-Time Southern Hemisphere Auroral Activity

Artical taken from
GlobalTuners
Issued by Pascal

2008-04-23T00:51:00.006+08:00

Digital DX

These day's Amateur Radio is not only for talking thru a microphone anymore. No Sir, Various modes of communication are available to ham operators.
One such mode of much interest is the Digital mode.

Which Digital mode you ask?,

Well, there again you have a variety of selections and groups involved.
Here is an attempt to explain how simple it is to tune and decode this exciting digital broadcasts and how one can get involved even without having an amateur license. All you need is a radio connected with a computer and some software.

The digital side of amateur radio allows data to be sent over the airwaves.
With your computer, your radio, and appropriate cables, you can hook the two together and communicate to others - No other special hardware necessary, although if desired, it can be optional. There are a number of digital modes that grace the airwaves these days. Some of the modes are intended for the lower HF bands, where communication can be made over longer distances.
Others are intended for local areas, using VHF and/or UHF frequencies, but can be extended over longer distances using digital repeaters, or digipeaters. Some of the digital modes can be done with just your computer and radio - using the computer's sound card to receive and decode the bits of information from audio to data.
All that is needed to use sound card modes is audio cables between your radio and sound card, and a cable hooking up to either the serial or parallel port on your computer to handle the PTT on the radio. You can use plain old cables, or there are a number of companies that make interfaces to simplify hookup - Hook common cables to an interface box, and plug the box into your radio. Some of the interfaces will reduce the audio output a small amount, allowing a clean audio signal to go between the radio and the computer, and vice versa.

Overview Digital Radio Operating Modes:

CW stands for Morse Code. This was the very first digital mode, but the most simple of them all. No computers are needed here, some dont regard this as a digital mode. Designed back the 1840's it uses a series of short and long blips which represent numbers, letters and symbols containing the morse code alphabet.

SSTV

SSTV Stands for Slow Scan TeleVision. The purpose of slow scan is to allow radio hams to send images to each other via the Radio Spectrum. The main useage of SSTV is on HF Bands, where Hams can send images around the world, and recive images from around the world, depending of HF conditions of course

RTTY

or "Radio Teletype" is a FSK mode that has been in use longer than any other digital mode (except for morse code). RTTY is a very simple technique which uses a five-bit code to represent all the letters of the alphabet, the numbers, some punctuation and some control characters. At 45 baud (typically) each bit is 1/45.45 seconds long, or 22 ms and corresponds to a typing speed of 60 WPM. There is no error correction provided in RTTY; noise and interference can have a seriously detrimental effect. Despite it's relative disadvantages, RTTY is still popular with die-hard operators.

PSK 31

is a new and upcoming mode, it is also a fantatsic digital mode for todays cramped bands. PSK31 was designed by Peter G3PLX and is designed to use a small amount of bandwidth. You can fit 6 PSK31 signals in a USB tranmission. This mode can be used as a live tranmission, meaning what ever you type into the machine will be seen on the other side, same as if there is a spelling mistake in there, and the transmitting machine deletes it, it will also be deleted at the recieving end.

PSK31 is the first new digital mode to find popularity on HF bands in many years. It combines the advantages of a simple variable length text code with a narrow bandwidth phase-shift keying (PSK) s

ignal using DSP techniques. This mode is designed for "real time" keyboard operation and at a 31 baud rate is only fast enough to keep up with the typical amateur typist. PSK31 enjoys great popularity on the HF bands today and is presently the standard for live keyboard communications. Most of the ASCII characters are supported. A second version having four (quad) phase shifts (QPSK) is available that provides Forward Error Correction (FEC) at the cost of reduced Signal to Noise ratio.

MFSK16

is an advancement to the THROB mode and encodes 16 tones. The PC sound card for DSP uses Fast Fourier Transform technology to decode the ASCII characters, and Constant Phase Frequency Shift Keying to send the coded signal. Continuous Forward Error Correction (FEC) sends all data twice with an interleaving technique to reduce errors from impulse noise and static crashes. A new improved Varicode is used to increase the efficiency of sending extended ASCII characters, making it possible to transfer short data files between stations under fair to good conditions. The relatively wide bandwidth (316 Hz) for this mode allows faster baud rates (typing is about 42 WPM) and greater immunity to multi path phase shift. This mode is becoming a standard for reliable keyboard to keyboard operation and is available in several popular programs.

MT63

is a new DSP based mode for sending keyboard text over paths that experience fading and interference from other signals. It is accomplished by a complex scheme to encode text in a matrix of 64 tones over time and frequency. This overkill method provides a "cushion" of error correction at the receiving end while still providing a 100 WPM rate. The wide bandwidth (1Khz for the standard method) makes this mode less desirable on crowded ham bands such as 20 meters. A fast PC (166 Mhz or faster) is needed to use all functions of this mode.

TOR

is an acronym for Teleprinting Over Radio. It is traditionally used to describe the three popular "error free" operating modes, AMTOR, PACTOR and G-TOR. The main method for error correction is from a technique called ARQ (automatic repeat request) which is sent by the receiving station to verify any missed data. Since they share the same method of transmission (FSK), they can be economically provided together in one TNC modem and easily operated with any modern radio transceiver. TOR methods that do not use the ARQ hand-shake can be easily operated with readily available software programs for personal computers. For these less complex modes, the TNC (terminal node controller) is replaced by an on-board sound card or out-board audio device. These modes may use redundancy or "human processing" to achieve a level of error correction.

AMTOR

is an FSK mode that has been fading into history. While a robust mode, it only has 5 bits (as did its predecessor RTTY) and can not transfer extended ASCII or any binary data. With a set operating rate of 100 baud, it does not effectively compete with the speed and error correction of more modern ARQ modes. The non-ARQ version of this mode is known as FEC, and known as SITOR-B by the Marine Information services.

PACTOR

is an FSK mode and is a standard on modern TNCs. It is designed with a combination of packet and Amtor Techniques. It is the most popular ARQ digital mode on amateur HF today. This mode is a major advancement over AMTOR, with its 200 baud operating rate, Huffman compression technique and true binary data transfer capability.

PACTOR II

is a robust and powerful PSK mode which operates well under varying conditions. It uses strong logic, automatic frequency tracking; it is DSP based and as much as 8 times faster then Pactor. Both PACTOR and PACTOR-2 use the same protocol handshake, making the modes compatible.

PACTOR-III

is a proprietary mode used for message and traffic handling over an HF radio circuit. Use of Pactor-III protocol is limmitted for US hams and some other countries due to the very wide bandwidth of the Pactor-III signal. Presently digital signals that occupy the bandwidth of PCT-III are restricted to a few sub bands: Only the embedded hardware (modem) from the German company that owns the rights to this mode, is capable of operating Pactor-III.

G-TOR

(Golay -TOR) is an FSK mode that offers a fast transfer rate compared to Pactor. It incorporates a data inter-leaving system that assists in minimizing the effects of atmospheric noise and has the ability to fix garbled data. G-tor tries to perform all transmissions at 300 baud but drops to 200 baud if difficulties are encountered and finally to 100 baud. (The protocol that brought back those good photos of Saturn and Jupiter from the Voyager space shots was devised by M.Golay and now adapted for ham radio use.)

CLOVER

is a PSK mode which provides a full duplex simulation. It is well suited for HF operation (especially under good conditions), however, there are differences between CLOVER modems. The original modem was named CLOVER-I, the latest DSP based modem is named CLOVER-II. Clovers key characteristics are band-width efficiency with high error-corrected data rates. Clover adapts to conditions by constantly monitoring the received signal. Based on this monitoring, Clover determines the best modulation scheme to use.

HF PACKET

is a FSK mode that is an adaption of the very popular Packet radio used on VHF FM ham radio. Although the HF version of Packet Radio has a much reduced bandwidth due to the noise levels associated with HF operation, it maintains the same protocols and ability to "node" many stations on one frequency. Even with the reduced bandwidth (300 baud rate), this mode is unreliable for general HF ham communications and is mainly used to pass routine traffic and data between areas where VHF repeaters maybe lacking.

Hellschreiber

is a method of sending and receiving text using facsimile technology. This mode has been around along time; the recent use of PC sound cards as DSP units has increased the interest in Hellschreiber. The single-tone version (Feld-Hell) is the method of choice for HF operation. It is an on-off keyed system with 122.5 dots/second, or about a 35 WPM text rate, with a narrow bandwidth (about 75 Hz). Text characters are "painted" on the screen, as apposed to being decoded and printed. A new "designer" flavor of this mode called FM HELL has some advantage for providing better quality print, at the expence of a greater duty cycle. As with other "fuzzy modes" it has the advantage of using the "human processor" for error correction.

THROB

is yet another new DSP sound card mode that attempts to use Fast Fourier Transform technology (as used by waterfall displays) to decode a 5 tone signal. The THROB program is an attempt to push DSP into the area where other methods fail because of sensitivity or propagation difficulties and at the same time work at a reasonable speed. The text speed is slower than other modes but the author (G3PPT) has been improving his MFSK (Multiple Frequency Shift Keying) program.

Article taken from
GlobalTuners

Issued by Pascal

My Very-very Small Shack

2007-11-16T10:57:00.003+08:00

Inventory List :

1. Icom V8000 Mobile Rig
2. Yeasu FT-60R HT Rig
3. Diamond SX-200 SWR / Power Meter
4. Modified Computer PSU 11.8 VDC
5. Clock ( Local Time )
6. Log Book
7. 'Ham' License
8. 5 elements Cubical Quad for 2 meters Band
9. Yagi-Uda Antenna for 2 meters and 70 cm Band
10. CW Training Kits

My Home Base Setup ( Portable )

2007-11-14T09:44:00.001+08:00

My Cubical Quad 5 Elements and J-Pole for 2 Meter

My Icom V8000 Installation by 9w2yed

2007-01-17T01:52:00.001+08:00

Based on my research in the internet, it is difficult for me to have guideline for newbie regarding on installation of mobile rig. Thus, I want to share my installation method so that it can be a guideline for all newbie as well as future newbie out there.

This is where I installed Icom V8000 in my Black Proton Iswara. Seems that it is the perfect place in the Iswara whereby the 45 degrees angle lower dashboard makes it easier for me to read the display of V8000. It took 3 hours for the accessories guy to make a nice handiwork installation which cost me RM50. A ham from Perak ones told me that it cost only RM15 in his area. I've search several accessories shops but couldn't managed to get that kind of price here in Ampang, Sel.

The power cable runs through the grommet and connected directly to 12VDC Car Battery. Here the power cable from stock has been used which included with 2x series fuse; at (+ve) cable and (-ve) cable. For the inner part, the cable runs down to the driver area and exit at the inner lower dashboard.

Running the antenna cable took the longest period in this installation process, where I've to decide the best location to runs it with less visibility.
Starting from the antenna’s mounting bracket, it was installed on the left side of the car so that I can monitor my Diamond (mc 101) antenna while I’m on the driver seat. The cable then was running along the inner side of the back wind screen and entering the cable grommet through the side panel of back passenger seat. At this phase it was difficult to run it through the grommet where the end of the antenna cable is quite big to go through it. The solution is to cut the side of the grommet in order to make sure the cable goes into inner part of the car.
It run through the inside panel, down to the carpet floor, and end up at the location where the rig has been installed.

As for the finishing touch, all exposed cables were covered with the cable's cover so that it looks tinnier as well as to increase the life span of the cable, especially inside the engine boot. In order to protect the grommet from any liquid discharge, silicon sealers were put to both in front and at the back of the grommet.

Icom V8000 is my dream rig and it makes me the happiest man to own it. To add a cream on the cake, the installment is just perfect. I am satisfied with the end result. Right now, I am just a SWL and I can’t wait to get my Amateur Radio License for me to QSO with all you guys out there.
73……

Site You Can Visit Regarding Amateur Radio

2006-12-18T00:45:00.000+08:00

Malaysian Communications and Multimedia Commission

http://www.mcmc.gov.my/

Malaysian Amature Radio Emergency Services Society

http://mares.org.my/

MY Amateur Radio Pictures Sharing

2006-12-18T00:02:00.000+08:00

Share with me Your amateur radio installation HERE

alsb_farid@yahoo.co.uk